Utilities for structured cabling from AMP netconnect

    This time we’re talking not about “intelligent” systems, but about simpler things that can at the physical level can greatly simplify the maintenance of a ready-made SCS. We will analyze and also consider in the photographs how useful, interesting SECURE security systems from the manufacturer AMP can be.

    I think many will agree that they have never met such accessories in practice. Moreover, given the factor of the absence of such, even among eminent manufacturers of SCS components. We can rightfully say that this is a kind of "know-how" of the manufacturer AMP netconnect (TE connectivity). The main purpose of this product line is to increase network security and simplify the administration of local networks.

    Typically, network security is provided by software. AMP NETCONNECT offers a new line of products that provide this solution at the physical level.

    This “protection” is provided by the introduction of connector security keys. Each connector has its own unique key, i.e. set of recesses and corresponding protrusions on the plug and socket. Their configuration makes it possible to articulate only the “right” forks and sockets. This prevents unauthorized connections / disconnections.

    The dimensions and installation dimensions of the protected sockets are the same as those of ordinary analogs, so they can be installed in standard patch and socket front panels.

    In fig. 1 presents a photo of the RJ-45 fork-lock. This lock is 34 mm long. The key itself is longer. Most likely for the impossibility of losing it.







    I immediately wanted to “lock up” some RJ-45 socket (an example on a laptop). It looks pretty serious and in moderation - reliable. In any case, you can’t pull it out with your hand.



    Such accessories can easily be used in everyday use. The meaning of use arises, for example, at the workplace (patch panel), where you want to restrict access to a port.

    In fig. 2 we will see a photo of a patch cord with a lock on both sides





    Mechanical lock on an RJ-45 plug on both sides of the patch cord
    The patch cords themselves are available in cat design. 5E; 6 Cable: U / UTP; S / FTP. Longer are available from 1 to 5 meters.

    The question immediately arises, where is it possible to apply such a patch cord? A good example would be to connect a payment terminal in a shopping center or just a store (photo below). There, as a rule, an ordinary socket with an RJ-45 port is installed. Knowing "our" people, someone will take and pull out a simple "unprotected" connection. And this is all the downtime of equipment that makes money (no need to say why this is bad).



    On the picture. 3 let's see what the nest looks like with the lock implemented in it.





    The lock itself is long with a connector under the patch cord 45mm. Pull out manually did not work. In any case, they pulled so hard that they would not tear off the connector.







    In addition to all of the above, I want to add that naturally these accessories cannot be considered as serious protection, but can prevent the most elementary opportunity for unnecessary connection or disconnection of the connection. I hope it turned out to share information about interesting accessories for SCS. Waiting for comments.



    MUK-Service - all types of IT repair: warranty, non-warranty repair, sale of spare parts, contract service

    Also popular now: