Instructions (!) On Android firmware in NAND HD2

Good evening everyone. Yes, I, of course, am aware that there are already two posts about Android on HD2 stitched into the NAND-memory, but both of them are pass-through / notification, and one did not get to the main one at all. Here I offer a complete instruction, carefully translated and verified, because many, even on holidays, are too lazy to poke around in bourgeois forums and sort out "what the ... new year it won't start."

So let's get started. First of all, we need:
1. A version of the radio module with support for 576 RAM . ^*
2. Installed HSPL 2.08 , we won’t be able to do without it.
3. Downloaded and unpacked to any empty folder MAGLDR 1.11 .
4. Downloaded and unpacked into any empty NANDroid folder. <sup>**
* Any ride older than 2.08.
** You can download this one . And even better - this one , the second one to start with - this is it. There is also a stock Desire (faster than an HD bus), but you will need to root it yourself.</sup>

It is also worth noting that we do not have to flash the original version of the firmware, any will do, if only HSPL 2.08 and a version of the radio module supporting 576 RAM stand on it .

Actually, that’s all. You can start the entertainment program.

1. We synchronize the phone through activesync or WMDC using a standard USB-cable
2. Open the folder into which we unpacked MAGLDR
3. RunROMUpdateUtility.exe on behalf of the administrator
4. We twice agree to all the risks and responsibilities, click "next"
• Here we check the usb connection
5. Click "update"
6. Check the image that will be updated (the name should be 2.00.000.0)
7 We press “next”, two times
8. The phone will go into bootloader mode and will slowly flash
9. After the flashing, the phone will restart itself. The first stage is completed.

Intermission, you can go have a drink / smoke / relax. What have we achieved at this stage? We requested a custom bootloader that starts after the main one and can run Android, which we will fill in the main memory immediately after the break is completed. By the way, the break is over.

•After a reboot, if you did everything correctly in the first part of the Marleson Ballet, the phone will launch MAGLDR
1. It’s navigating using the volume buttons, as well as “pick up the phone” and “hang up”
2. Once you’ve mastered the controls, go to Option 4 : USB Flasher , after which we select the item by pressing “off-hook” (the far left button)
3. The phone will go into Android firmware mode, install USB drivers if they are not already
4. (on the computer) Open the folder into which we unpacked Nandroid , run DAF.exe as administrator
5. Chita m, we agree, we press "next"
6. Then everything will pass without our participation. The flasher will flood the Android build into the phone, the phone will reboot, after 10-15 minutes you will already have working Android in the phone’s memory.
On this, in fact, the instruction is over. Questions are welcome, as I receive, I will add some of them to the post, if they are repeated / relevant. Thank you all for your attention.

Once again links, just in case
MAGLDR: one , two , three
Firmware: once
HSPL: one , two

UPD1: About HSPL and firmware / synchronization you can also read in my last post.
UPD2:Factory WinMo easily returns to its rightful place, just download the stock firmware, twist the battery, hold down “volume down” and load the mattress mode. After - flash, as usual, flash.
UPD3: For those who chose the first assembly (cyanogen): Download fix , unpack to a memory card. On the phone, open the console, run the following commands: UPD4: For everyone who wants to get Sense 2 (Like Desire HD) - is.gd/jYIIg sew this assembly. UPD5: For those who performed UPD4 - do not forget to restart the phone a couple of times immediately after the first boot and initial installation. (Boot, reboot, boot, reboot). UPD6:
$ SU
rm -f /system/lib/modules/*
cp -f /sdcard/hotfix/* /system/lib/modules
rm -rf /sdcard/hotfix
rm -rf /sdcard/gscript/fix.sh


For users of the Navitel license: you can convert your key to the android version (1 time) navitel.su/support/re-registration
UPD7: Stock Desire firmware works faster than DHD, but you need to do the root yourself.