New FlashForge Inventor vs. Dreamer
Hello!
The other day, a new 3D printer, FlashForge Inventor , came to us . It looks very similar to another popular model of this brand - Dreamer . We decided to figure out what new features appeared at Inventor, and what is the actual difference between these printers.
Externally, printers look like brothers, differ only in color. And the size, and arrangement of elements, and design are identical.
As can be seen from the table, Inventor added 2 centimeters of the print area in height. The rest is all the same. But on closer examination, the differences will be visible.
Options remained unchanged.
All tools are placed in a small, neat suitcase. Trifle, but nice.
The first difference was found when starting the printer. Optical sensors are installed instead of limit switches on all axes.
Zero Z has moved down. Due to this, it was possible to add 2 centimeters to the working area without changing the dimensions of the printer.
FlashForge added a very valuable feature to resume printing. Now you can not worry when printing large models. After the power is turned off, printing will continue in the same place where it was interrupted.
In the upper right corner inside the Inventor printer placed the built-in camera.
Working with the camera
To work with the camera, you must install the XMEye application on your phone or tablet.
It took us some time to connect the printer with the application, but if we follow the instructions clearly, we should have no problems.
We played around with the app, appreciated all its features, including: online print broadcast, video recording, photo creation, audio recording over video, “Share with friends” function, even zoom adjustment, simultaneous connection and display of the printing process on other Inventors (there are options for displaying 1, 4, 6, 9 and 16 broadcasts).
You can choose HD-quality images, but if the Internet is bad, the picture will slow down. The manual states that you can follow the seal wherever you are, the only condition is that you have an Internet connection in your phone. Unfortunately, we didn’t manage to connect to the camera via the mobile Internet, but when using any available Wi-Fi network everything works like clockwork =) The
printer’s functionality has changed a bit and now you can connect to the printer using the Happy3D mobile application. Ready models via Wi-Fi are loaded from the application into the printer and stored in the RAM.
Learning how to work in the program is very simple, judging by the interface, it is designed for children as well. You can draw your models or use ready-made, loaded into the program (which is convenient when working with children).
It seemed to us that working with the application through the phone was not very convenient, due to the small size of the working area. Ideally use a tablet.
As in the Dreamer, inside the printing chamber of the Inventor placed 5 fans and a temperature control sensor.
It can perfectly print ABS plastic - due to the closed camera and at the same time, thanks to the fans on the case, it even copes with miniature PLA plastic models.
Not without some inconvenience. In the printer, it is still not possible to change the temperature of the pad or extruder during printing. Every time you have to re-prepare the model and launch a new print.
FlashForge Inventor and Dreamer are really like brothers - all the functions that Drimer has are also represented in Inventor. But still, Inventor got a nice upgrade from the developers.
He was endowed with additional features that will be appreciated by many 3D printers. =)
In addition to increasing the print area along the Z axis, the printer has a camera for capturing the printing process and added a useful feature to resume printing.
The difference in cost between printers at the moment is about 10,000 rubles. Price Inventor 79900 rub., Dreamer - 69500 rub.
Printer specifications can be found here .
Join us in the social. networks to keep abreast of the latest events:
Facebook - VKontakte -YouTube Color World
Company Team
The other day, a new 3D printer, FlashForge Inventor , came to us . It looks very similar to another popular model of this brand - Dreamer . We decided to figure out what new features appeared at Inventor, and what is the actual difference between these printers.
Externally, printers look like brothers, differ only in color. And the size, and arrangement of elements, and design are identical.
Specifications
As can be seen from the table, Inventor added 2 centimeters of the print area in height. The rest is all the same. But on closer examination, the differences will be visible.
Equipment
Options remained unchanged.
- 2 plastic coil 0.6 kg.
- Usb cable
- Sd card
- Coil holders
- Putty knife
- Hexagon set
- Screwdriver
- Spare Nuts and Bolts
- Tweezers
- Knife
- Site Leveling Map
- 2 spare areas
All tools are placed in a small, neat suitcase. Trifle, but nice.
Constructive
The first difference was found when starting the printer. Optical sensors are installed instead of limit switches on all axes.
Zero Z has moved down. Due to this, it was possible to add 2 centimeters to the working area without changing the dimensions of the printer.
FlashForge added a very valuable feature to resume printing. Now you can not worry when printing large models. After the power is turned off, printing will continue in the same place where it was interrupted.
In the upper right corner inside the Inventor printer placed the built-in camera.
Working with the camera
To work with the camera, you must install the XMEye application on your phone or tablet.
It took us some time to connect the printer with the application, but if we follow the instructions clearly, we should have no problems.
We played around with the app, appreciated all its features, including: online print broadcast, video recording, photo creation, audio recording over video, “Share with friends” function, even zoom adjustment, simultaneous connection and display of the printing process on other Inventors (there are options for displaying 1, 4, 6, 9 and 16 broadcasts).
You can choose HD-quality images, but if the Internet is bad, the picture will slow down. The manual states that you can follow the seal wherever you are, the only condition is that you have an Internet connection in your phone. Unfortunately, we didn’t manage to connect to the camera via the mobile Internet, but when using any available Wi-Fi network everything works like clockwork =) The
printer’s functionality has changed a bit and now you can connect to the printer using the Happy3D mobile application. Ready models via Wi-Fi are loaded from the application into the printer and stored in the RAM.
Learning how to work in the program is very simple, judging by the interface, it is designed for children as well. You can draw your models or use ready-made, loaded into the program (which is convenient when working with children).
It seemed to us that working with the application through the phone was not very convenient, due to the small size of the working area. Ideally use a tablet.
As in the Dreamer, inside the printing chamber of the Inventor placed 5 fans and a temperature control sensor.
It can perfectly print ABS plastic - due to the closed camera and at the same time, thanks to the fans on the case, it even copes with miniature PLA plastic models.
Not without some inconvenience. In the printer, it is still not possible to change the temperature of the pad or extruder during printing. Every time you have to re-prepare the model and launch a new print.
Results
FlashForge Inventor and Dreamer are really like brothers - all the functions that Drimer has are also represented in Inventor. But still, Inventor got a nice upgrade from the developers.
He was endowed with additional features that will be appreciated by many 3D printers. =)
In addition to increasing the print area along the Z axis, the printer has a camera for capturing the printing process and added a useful feature to resume printing.
The difference in cost between printers at the moment is about 10,000 rubles. Price Inventor 79900 rub., Dreamer - 69500 rub.
Printer specifications can be found here .
Join us in the social. networks to keep abreast of the latest events:
Facebook - VKontakte -YouTube Color World
Company Team