
Rare breed coasters
Greetings! Recently, I wrote about unusual metal devices for laptops - simple cooling pads from LUXA2 (a brand from Thermaltake). Stylish and generally pleasant things, but far from everyone needs them - not everyone has a laptop.

But today you cannot find a person without a phone - today is a short story in pictures about several compact mounts, including for phones. I saw them in the office of the company when I drove the supports mentioned above.

Last time I talked about the company itself - this time it is worth recalling that the company makes stylish accessories for the most part only for Apple products, but there are no restrictions for other devices. So I'll start, perhaps, withLUXA2 Mobile Holder H4 - a special stand for the iPad.

This time, the device looks no less predatory - on a massive aluminum leg is a movable metal stand. Its "tentacles" (which carry out the necessary fixation) can be moved and moved apart, adjusting the space under the device.

The hinge looks more than reliable and has several degrees of freedom - it will be very easy to place the gadget in the right way. Workmanship is beyond praise.

The stand itself on the hinge rotates 360 degrees around its axis, for another 300 it can be tilted in different directions (vertically).

The manufacturer’s website says support for the iPad and the Kindle DX e-bookHowever, nothing will prevent you from using any other reader or photo frame - the mount is quite universal. But the iPad looks like this: You can


put H4 in two ways - so that the leg inscription is visible, or like an iMac:


Weight is only 443 g. The price is still unknown, but most likely it will be 1,500-2,000 rubles. On the one hand, it’s quite expensive for a stand ... on the other hand, even the most helpless case for an iPad costs at least twice as much.
In order not to make a separate topic, I will supplement the post with photos of mounts for mobile phones. It’s not just the iPhone that gets in — every employee had such phones in the office and there were no iPhones in any of the stands)

There are two versions - one [ LUXA2 H1-Touch] also with a movable mechanism (more universal and reliable):


The second [ LUXA2 H2 ] is simpler - a rubber gasket is applied to part of its body, which holds the phone due to friction. Not so reliable, but it works. So, for example, HTC HD2 looks like this: The

site also has a model for mounting in a car, but in reality I haven’t seen it and can’t say anything about it. But, I think, it will be more pleasant than frankly Chinese mounts, which are full of all shops and markets.
Well, that’s probably all :) The iPad is mine, but I don’t use any fastening with it - I always carry it in a case from EeePC, where it fits perfectly with documents. But for the phone, something would have to be invented, otherwise it always lingers unclear where. But for more than a year now I’ve been using a stand from Ergotron for a netbook - judging by the number of questions in PM, I’ll have to write about it too) Well, what else would be interesting to read about?

Thank you for your attention and success!

But today you cannot find a person without a phone - today is a short story in pictures about several compact mounts, including for phones. I saw them in the office of the company when I drove the supports mentioned above.

Last time I talked about the company itself - this time it is worth recalling that the company makes stylish accessories for the most part only for Apple products, but there are no restrictions for other devices. So I'll start, perhaps, withLUXA2 Mobile Holder H4 - a special stand for the iPad.

This time, the device looks no less predatory - on a massive aluminum leg is a movable metal stand. Its "tentacles" (which carry out the necessary fixation) can be moved and moved apart, adjusting the space under the device.

The hinge looks more than reliable and has several degrees of freedom - it will be very easy to place the gadget in the right way. Workmanship is beyond praise.

The stand itself on the hinge rotates 360 degrees around its axis, for another 300 it can be tilted in different directions (vertically).

The manufacturer’s website says support for the iPad and the Kindle DX e-bookHowever, nothing will prevent you from using any other reader or photo frame - the mount is quite universal. But the iPad looks like this: You can


put H4 in two ways - so that the leg inscription is visible, or like an iMac:


Weight is only 443 g. The price is still unknown, but most likely it will be 1,500-2,000 rubles. On the one hand, it’s quite expensive for a stand ... on the other hand, even the most helpless case for an iPad costs at least twice as much.
In order not to make a separate topic, I will supplement the post with photos of mounts for mobile phones. It’s not just the iPhone that gets in — every employee had such phones in the office and there were no iPhones in any of the stands)

There are two versions - one [ LUXA2 H1-Touch] also with a movable mechanism (more universal and reliable):


The second [ LUXA2 H2 ] is simpler - a rubber gasket is applied to part of its body, which holds the phone due to friction. Not so reliable, but it works. So, for example, HTC HD2 looks like this: The

site also has a model for mounting in a car, but in reality I haven’t seen it and can’t say anything about it. But, I think, it will be more pleasant than frankly Chinese mounts, which are full of all shops and markets.
Well, that’s probably all :) The iPad is mine, but I don’t use any fastening with it - I always carry it in a case from EeePC, where it fits perfectly with documents. But for the phone, something would have to be invented, otherwise it always lingers unclear where. But for more than a year now I’ve been using a stand from Ergotron for a netbook - judging by the number of questions in PM, I’ll have to write about it too) Well, what else would be interesting to read about?

Thank you for your attention and success!