Flashing new Nokia s60 or Hacking new Nokia firmware
Flashing new Nokia s60 or Hacking new Nokia

XXX firmware : What gives us a hack?
YYY: This allows a lot: from the easy installation of any software that requires a signature to modifying ROM files without flashing the phone! and many more charms.
To begin with, the idea is not mine, but on the manuals of the Internet it wasvery difficult to read and run a lot of links on different sites . And so I decided to share with you how I went through this difficult path with my manual. I would also like to note that no one except you is responsible for accidentally * killed * the phone does not bear.
I myself amhappythe owner of Nokia N97 mini and all the manipulations will be done specifically on this model (the difference between other models in one step will be described below)
AHTUNG SAVE ALL NECESSARY DATA FROM THE PHONE, during the firmware process all data from the phone’s memory will disappear !!!
ATTENTION OF MODS WE ONLY SET FOR OUR FIRMWARE VERSION !!!
Let's start, first of all, we need the firmware itself for our device (I recommendDimonvideo - I need registration, because all the necessary file replacements have already been made), and you can find firmware modifications in the firmware discussion topic, for example, a mod for N97mini that I attached a lot of effort, and thanks Vet-ra for the implementation of the mod.
BraveAnd Those who want to personally modify the firmware I will not personally describe here , because there is a manual for blondes in pictures.
We continue, download JAF 1.98.62 , set, delete all the shortcuts created by JAF from the desktop, then ATTENTION IF XP, then download JAF_1.98.65_final and deal with the manual in the archive. If the axis is seven, then download JAF_Rebuild_2.0 and install. For these models, use the ini file . For these models use ini file. Put it in the JAF installation folder (for example, c: \ program files \ odeon \ JAF). We remove all the programs associated with Nokia, say PCSute, and install a single driver for all Nokia phones: NCCD 7.1.27.0
To avoid problems, turn off antiviruses and run the shortcut on the desktop as administrator in XP compatibility mode, I performed all the manipulations on Win7 x64.
If all of the above is done, and nothing swears, then go ahead.
Currently there is a hack for the following models:
e51 v400
e52 v31
e75 v202
N86 v21
N97 mini v11
N97 v21
5800 v40
Unpack the firmware along the path C: \ Program Files \ Nokia \ Phoenix \ Products \ RM-XXX \ (There may be another one instead of drive C. Unpack to where the firmware program is installed!), Where RM-ХХХ should correspond to your model.
FURTHER OPERATIONS TO DO ONLYWITH DIRECT HANDS AND ON A SOBBLE HEAD
We launch JAF as described above and configure it as indicated in the picture below

everything should be exactly as in the picture, after you ticked Use ini, the program will prompt you to select your phone ( what phone and RM-XXX you have under the battery) we look at the screen

JAF will download the firmware files as on the screen

If everything is as on the screens FURTHER READ MORE CAREFULLY:
1. TURN OFF the phone
FURTHER TESTING THE SECOND OPTION If you DO NOT TROUBLES TESTING THE THIRD
(2. Press the FLASH button in JAF and press the phone’s power button once (don’t need to hold it!)
JAF will start the firmware process)
3. Turn off the device, remove the battery, insert it back, the phone DOES NOT turn on.
Press the FLASH button, a warning appears. Press
OK in the warning and immediately insert USB into the device.
If the firmware process did not start and Windows started installing firewood, after the installation of firewood is complete, repeat step 3 until the firmware process begins.
4. When the firmware ends you will receive a phone with ROMPatcher Plus preinstalled
Now download the patches. We put them in E: \ Patches on your smartphone, launch ROMPatcher +, apply them and put them into autorun.
Now your smartphone is successfully hacked!
(but so far only up to the first format ... after that you will have to flash the smartphone again ...)
In themod, this is fixed and when flashing with modified firmware we can check the boxes at the first step so ONLY IF YOUR FIRMWARE VERSION IN THE TELEPHONE matches the FIRMWARE VERSION, while data and settings in the phone will not be lost after the hard reset will be hacking

but strongly recommended to put a tick Factory the Set (ONLY FOR MODIFIED firmware), and format the built-in flash memory (if any) and the memory card again in order to avoid the distance eyshih problems.
It seems that’s all, a successful hack.

XXX firmware : What gives us a hack?
YYY: This allows a lot: from the easy installation of any software that requires a signature to modifying ROM files without flashing the phone! and many more charms.
To begin with, the idea is not mine, but on the manuals of the Internet it was
I myself am
AHTUNG SAVE ALL NECESSARY DATA FROM THE PHONE, during the firmware process all data from the phone’s memory will disappear !!!
ATTENTION OF MODS WE ONLY SET FOR OUR FIRMWARE VERSION !!!
Let's start, first of all, we need the firmware itself for our device (I recommend
We continue, download JAF 1.98.62 , set, delete all the shortcuts created by JAF from the desktop, then ATTENTION IF XP, then download JAF_1.98.65_final and deal with the manual in the archive. If the axis is seven, then download JAF_Rebuild_2.0 and install. For these models, use the ini file . For these models use ini file. Put it in the JAF installation folder (for example, c: \ program files \ odeon \ JAF). We remove all the programs associated with Nokia, say PCSute, and install a single driver for all Nokia phones: NCCD 7.1.27.0
To avoid problems, turn off antiviruses and run the shortcut on the desktop as administrator in XP compatibility mode, I performed all the manipulations on Win7 x64.
If all of the above is done, and nothing swears, then go ahead.
Currently there is a hack for the following models:
e51 v400
e52 v31
e75 v202
N86 v21
N97 mini v11
N97 v21
5800 v40
Unpack the firmware along the path C: \ Program Files \ Nokia \ Phoenix \ Products \ RM-XXX \ (There may be another one instead of drive C. Unpack to where the firmware program is installed!), Where RM-ХХХ should correspond to your model.
FURTHER OPERATIONS TO DO ONLY
We launch JAF as described above and configure it as indicated in the picture below

everything should be exactly as in the picture, after you ticked Use ini, the program will prompt you to select your phone ( what phone and RM-XXX you have under the battery) we look at the screen

JAF will download the firmware files as on the screen

If everything is as on the screens FURTHER READ MORE CAREFULLY:
1. TURN OFF the phone
FURTHER TESTING THE SECOND OPTION If you DO NOT TROUBLES TESTING THE THIRD
(2. Press the FLASH button in JAF and press the phone’s power button once (don’t need to hold it!)
JAF will start the firmware process)
3. Turn off the device, remove the battery, insert it back, the phone DOES NOT turn on.
Press the FLASH button, a warning appears. Press
OK in the warning and immediately insert USB into the device.
If the firmware process did not start and Windows started installing firewood, after the installation of firewood is complete, repeat step 3 until the firmware process begins.
4. When the firmware ends you will receive a phone with ROMPatcher Plus preinstalled
Now download the patches. We put them in E: \ Patches on your smartphone, launch ROMPatcher +, apply them and put them into autorun.
Now your smartphone is successfully hacked!
In the

but strongly recommended to put a tick Factory the Set (ONLY FOR MODIFIED firmware), and format the built-in flash memory (if any) and the memory card again in order to avoid the distance eyshih problems.
It seems that’s all, a successful hack.