October 12, 2009 at 7:24 Add a second antenna to the D-Link DIR-300
For this action we need:
The router itself +
Antenna
+ soldering iron and not trembling hands :)
We are preparing
Unscrew the screws, remove the top cover and see.
Let's take a closer look and go
- We remove the element C109 (it limits the signal power)
- Element C161 should be located as in the photo (on old revisions of the board it can be located vertically)
- We solder the core and the braid of the cable into place
As a result, we get something like this
