Disassembly of the iPhone 5 and some design differences from previous iPhone models

  • Tutorial


Immediately after the start of the analysis of the iPhone 5, we noticed serious design differences from previous models. And almost all of these differences were in a positive direction.

Display module


First: the display module is removed first. This is very important if only because replacing the display after an unsuccessful fall of the iPhone is the most common reason for opening these devices.

image

Screens Locking Connectors


Secondly: all the cables are now not only snapped and glued, but also fixed on top with metal screens. This, of course, gives more reliability from “snapping off” the connectors at the time of a fall or shock.

image

image

image

image

image

Board Screens


Thirdly: all screens on the board are soldered tightly. If before almost all screens could be snapped off, now you need to solder them. This is very inconvenient during the repair process. And not only because of the waste of time, but also because of the danger of overheating something.

image

Another of the nice buns



The sizes of polyphonic and auditory speakers are increased in size. And this parameter, as you might guess, can significantly affect the quality and volume of the sound.

As you already know, the system connector of the iPhone 5 is far from the same as before. The new connector has no top and bottom - you can insert as you like. Well, this, in turn, will save from classic breakdowns of the connector with a "crooked" connection.

The rest of the apparatus is like an apparatus. See the video for more details on the internal device .



Those interested can see the analysis of all previous Apple iPhone models, including the CDMA model: iPhone 2G , iPhone 3G , iPhone 4 , iPhone 4S , iPhone 4 CDMA , iPhone 5 .

Follow the news channel GTV can Vkontakte .

Also popular now: