XBee API Mode LabView Framework
The video shows an example of working with XBee through LabView.
In the example, the LM60 sensor is used , the data from it is removed by the built-in ADC in the XBee.
Communication takes place via the Xbee API protocol. To solve this problem, there is a small framework that implements communication with the XBee-USB adapter via NI-VISA .
Explanations for the video:
1. The ADC module is connected (the LED is on - it means the device is not yet in the network)
2. The coordinator is connected (the LEDs blinked on both devices, so the network is established).
3. We take the temperature sensor with our fingers - the temperature rises, release - decreases.
UPD: This article is for informational purposes only. source codes are laid out .
In the example, the LM60 sensor is used , the data from it is removed by the built-in ADC in the XBee.
Communication takes place via the Xbee API protocol. To solve this problem, there is a small framework that implements communication with the XBee-USB adapter via NI-VISA .
Explanations for the video:
1. The ADC module is connected (the LED is on - it means the device is not yet in the network)
2. The coordinator is connected (the LEDs blinked on both devices, so the network is established).
3. We take the temperature sensor with our fingers - the temperature rises, release - decreases.
UPD: This article is for informational purposes only. source codes are laid out .