Is it right to fry meat? Not a problem if MEATER is at hand

One of the things that a person cannot live without is food. And we all love to eat, right? And one of the most delicious foods (subject to proper preparation) is meat. If you cook the meat dish correctly, then it is simply impossible to come off. True, if you overexpose the meat in the oven / grill, or, conversely, remove it from the heat too early, it will not work out very well.
During the whole cooking process, the temperature regime should also be correct - and only an experienced person can determine this. But what if the experience is not too much, but you want to eat tasty food? Meater then comes to the rescue - a wireless thermometer that is equipped with a Bluetooth module, plus device developers have released an application that monitors the process of cooking meat and tells when the dish is ready. Perhaps Meater will eliminate the situation when you find out that the dish is spoiled by the characteristic haze that seeps out of the oven.
Principle of operation

Some photos with snacks:


As soon as the meat or poultry is cooked, the mobile application on the smartphone displays the corresponding message.

You can not follow the meat, but conduct an interesting conversation with friends, without sniffing or running to the stove every five minutes. In any case, the developers promise it.

Design
If desired, you can purchase a whole Meater unit, with an integrated sensor. All this looks very stylish, as it should be an accessory for a good kitchen. For the operation of Meater Block, Meater Link and Meater Cloud (how much it takes to cook meat, it turns out!), You need a wireless Wi-Fi network. This will allow you to receive information from Meater, wherever you are.


Beginning of work
Step 1: Turn on Meater and launch the application

Step 2: Select a recipe, a dish, and enter the Meater probe into meat or poultry

Step 3: Turn on the stove and monitor the application

Finals: as soon as the meat is ready, Meater will send a notification to the phone. The signal is accompanied by sound and vibration.


Some more tasty photos:

The sensitivity of the device is 0.5 degrees Celsius.

Examples of using
Chicken


Beef


Pork


Technology
Meater, in addition to the wireless module, is equipped with two temperature sensors. The first is located on the sharp end of the device, and determines the temperature of the dish. The second is on the other end of the device, and determines the temperature of the air in the oven.

If you use the Meater unit, the signal will be transmitted over a long distance.

Without a block, the signal is transmitted up to 10 meters away. The probe body is protected from dust, dirt, and it is very easy to clean.
Inside there is also a battery that is charged using a special dock.

application
The program for Meater can monitor the temperature of the product and the air around the probe in real time.
If you select the type of meat, the level of frying, the program will automatically set the desired temperature;
The sensor sends a notification to the mobile phone;
Shows the time of readiness and monitors the cooking process;
Communicates with a cloud service;
Works on iOS and Android devices.
If you like meat, then you definitely need Meater.

Where could I buy?
So far, Meater is available for pre-order only, on Kickstarter . There were a lot of meat lovers here, apparently, this can explain the fact that now Meater has collected 4 times more money than was planned. A little more, and about $ 500 thousand will be raised.

Note: MEATER is a gadget that is not yet on sale. In the range of the company "Dadget" this system is also not. True, there is such an infrared thermometer that can be very useful for cooking steaks :)
Dadget Testing Invitation
The dadget invites authors interested in testing our devices and writing an objective review, to collaborate. The device after the publication of the review remains with you. More information about the offer is here .