Welcome to the DIY Meetup March 4
Hello! On the fourth of March, we invite all the makers to our next Do It Yourself Meetup, which will be held at the Moscow office of Mail.Ru Group. This time we will talk about aviation, teach a cat to use a sensor controller, find out what a sequencer is, take a ride on an electric bike - and that's not all. Register and come. It will be interesting! In the meantime, you can watch a video from the past mitap on our youtube channel .
10:00 Start registration
10:30 Kirill Snezhko "Your own fr24.com on the balcony"
In general, about aviation. The main source of information is ADS-B and an additional source is ACARS. The optimal choice of the antenna. RTL-SDR, RPi, dump1090, vrs.
11:00 Alexander Selishchev “EspSky - Online IDE for NodeMCU”
Firmware esp8266 using NodeMCU. Connecting the module to EspSky and downloading Hello World sample via the Internet. Update and autorun code when the module is turned on. Further development of the project and the call of like-minded people.
11:30 Kirill Atroshkin “Toy Story: Turning a “ Stupid ”Toy Car into an AI Agent”
What do modern toys teach and do not teach children? How to give a simple toy functionality "smart". Do I need to be a programmer to write a simple application for a smartphone. And most importantly, why and who needs all this?
12:00 Gleb Kanin “Automatic drinking bowl for a cat”
As a non-specialist, I had to dive into electrical engineering. About the controller capacitive sensor from Atmel. Overcoming difficulties with nutrition, from 5V did not work. Making touch mat. Teaching a cat.
12:30 Break
13:00 Alexander Sokolov “DIY Sequencer”
What is a sequencer (a device for reading DNA) and sequencing? Stages through which I had to go to create this device. Plans for the future.
13:30 Oleg Makarenko“Electric Bike. Do-it-yourself motor controller »
Three-phase motor controller. H-Bridges from MOSFET. Control powerful engine with Arduino.
14:00 Artem Korotkov “How to make a case for a DIY device”
How to choose a material, model a case, prepare patterns, cut and assemble a case for a device - using the example of a homemade NIXIE watch.
14:30 Boris Rebrov “How and why to assemble a kopter”
On the basis of personal experience I will try to answer the questions faced by everyone who stood on the curve of the copter building:
- Why do we need copters?
- Why do you need it?
- How do they fly?
- Where to begin?
- How to choose and buy components?
15:00 Break
15:15 Denis Mikhalsky "Developing DIY devices for the Apple Homekit
platform " Homekit platform. The history of platform emulation. My project: hardware (Arduino, nrf24l01 + and Raspberry Pi). My project: software (Mysensors, Domoticz, Homebridge and edomoticz). Demonstration of the result.
15:45 Kirill Smirnov "Development of an unmanned vehicle from scratch for dummies"
Racing past -> unmanned future. A little story about how my professional background influenced the topic of my dissertation. Why are they all so slow? Review of existing restrictions affecting the maximum speed of movement of unmanned vehicles. Acquaintance with TORCS. Identify the features of an open source simulator and showcase your own project. ROS! Easier than it seems! Robotic Operation System and its features. Perspectives and goals. Conclusion, where I will tell you what will happen next and what the real car will look like on which I am going to test my algorithms.
Participation is free, registration is required. Address: Mail.Ru Group office, Leningradsky prospect, 39, p. 79. We are waiting for you on our mitap!